Construction National

Magazine, Online Directory and Web Design Service

Wed20032019

Last updateThu, 14 Mar 2019 4pm

MSA Safety welcome tightened criteria to reflect real-life usage

Despite the many systems designed to safeguard workers, Health and Safety Executive statistics demonstrate that falls from height still remain one of the most common causes of workplace injury and death. MSA Safety, the global safety company which acquired UK fall protection manufacturer Latchways in 2015, is an industry leader in best practice and safety standards. As such, the company is aware of the potential risks associated with working at height - and it continually works with regulatory bodies to ensure that safety standards are as clear and robust as possible.

In April 2018, MSA was instrumental in changing EN 353-1:2014 test standards to the revised standard EN 353-1:2018[1]. This update was designed to ensure testing reflected the real-life use of guided type fall arrestors. 

MSA continues to meet and exceed the very latest safety standards for engineered systems and highlight those that may need further clarification. This has been shown by the recent update to the safety criteria for the MSA Latchways vertical system, following conversations with DEKRA. While MSA has always met or exceeded regulations in terms of weight permitted, the update now reflects more closely the real-life use of the system, where users carry kit that contributes to an increased load.

MSA tests were previously carried out using the following criteria:

  • 2x 50-150kg users and 1x 50-100kg user = 3 users

From October 2018, the maximum usage advisory has been changed to:

  • 2x 50-150kg users, or a total weight of 300kg where there is one energy absorber in use at the top anchor.

Or

  • 4x 50-150kg users, or a total weight of 600kg where there are two energy absorbers in use at the top anchor.

The update isn’t relevant to the MSA TowerLatch SP attachment device, as it has an integrated energy absorber as part of the design. When this product is used by each user in conjunction with the vertical lifeline, the system can facilitate up to four users at any one time. 

“MSA encourages specifiers to be vigilant when it comes to choosing and using safety equipment. They should always look carefully to ensure the user weight certified is representative of real-life use - it’s important to look beyond just the number of users,” adds Tim Bissett. “Our equipment is designed, manufactured and tested with the end-user and application in mind, using a mass of 150kg to represent the combined weight of users and their equipment. DEKRA agrees with our approach and we welcome updates to this standard, which has resulted in an amendment to the number of users, but importantly offers greater clarity, safety and peace of mind.” 

For further information visit www.msasafety.com/global